Ultimate Guide to Cleaning Your 100cm Silicone Love Doll

Essential Cleaning Supplies

Gather necessary supplies before cleaning:

Mild, PH-Neutral Soap: Liquid antibacterial hand soap or specialty doll cleaner.
Lukewarm Water: (Never use hot water)
Clean Microfiber Cloths: 2-3 dedicated cloths for washing and drying.
Soft White Towel: For laying the doll down during cleaning.
Powder (Cornstarch or Renewal Powder): For maintaining the silicone surface (optional after cleaning, recommended periodically).
Isopropyl Alcohol (70%): Only for targeted disinfection of hard, non-porous internal inserts after removal (if applicable).
Cotton Swabs/Q-Tips: For detailed cleaning of crevices.
Cool Hair Dryer: (Optional) For gentle drying aid.

AVOID: Harsh detergents, solvents, oil-based soaps, alcohol-based cleaners (on silicone skin), abrasive cloths/sponges, colored towels.

Preparation: Lay the doll flat on a clean white towel. Remove wigs and any detachable accessories.
Washing: Dampen a microfiber cloth with lukewarm water and apply a small amount of mild soap. Gently wipe down the entire silicone body surface using circular motions.
Focus Areas: Pay special attention to crevices (neck joints, underarms, finger/toe spaces, navel, buttocks), makeup areas, and any noticeable dirt. Use cotton swabs for intricate details.
Rinsing: Thoroughly rinse the soap using a different clean, damp microfiber cloth. Change rinse water frequently. Ensure no soap residue remains.
Drying: Pat the skin completely dry with a clean microfiber cloth. Use a cool hair dryer (lowest heat setting only, held at least 12 inches away) or simply allow air drying in a cool, well-ventilated area away from direct sunlight for several hours. Skin must be 100% dry.

Non-Removable Openings: Never submerge the head or immerse the torso. Dampen a microfiber cloth with soapy water. Carefully insert a clean finger wrapped in the cloth and gently wipe the interior surfaces. Never force. Rinse using a damp cloth (water only), then a dry cloth to pat out moisture. Prop open with soft cloth/paper towel to air dry completely internally before closing.
Removable Inserts: Remove carefully. Wash thoroughly inside and out with mild soap and lukewarm water using fingers or a soft cloth. Rinse extremely well. Air dry completely before reinserting. For targeted disinfection (periodically), wipe with 70% isopropyl alcohol after washing and drying. ALWAYS use condoms for penetrative use.

Absolute Rule: The doll must be completely dry internally and externally before storage or powdering.
Methods: Pat dry meticulously with microfiber cloths. Air dry in a cool, dust-free environment away from heat, sunlight, or UV light sources.
Air Circulation: Ensure good airflow (e.g., use a fan on low, indirect setting) to speed drying, especially for internal cavities. Moisture trapped causes mold/mildew.
Check: Verify deep crevices and orifices are bone dry before proceeding.

Purpose: Restores skin texture, reduces tackiness, prevents silicone oils from leaching to the surface (“sweating”).
When: After complete drying or periodically when skin feels sticky. Typically every 1-2 weeks or after several washes.
How: Generously dust entire silicone body with cornstarch or specific renewal powder using a powder puff or large soft brush (dedicated).
Focus Areas: Joints, areas prone to friction.
Remove Excess: Gently brush or puff away loose powder after application.

Position: Store lying down flat or slightly elevated on her back. Store standing only if specifically designed for it and for short durations.
Environment: Cool, dry, dark place. Avoid extreme temperatures, humidity, direct sunlight (fades/degrades silicone), and dust.
Protection: Store nude or in loose, light-colored cotton clothing. Avoid dark or dyed fabrics. Wrap loosely in a clean white cotton sheet or store in breathable storage bag.
Support: Use foam blocks to support joints/curves and prevent deformation over time. Avoid pressure on facial features. Remove wigs to prevent staining.
Separation: Store away from plastics (PVC), rubber, or printed materials that could leach chemicals or cause staining.

After Every Use: Basic wipe-down with mild soapy water/cloth on contact areas; extensive cleaning after intimate use.
Weekly/Bi-weekly: Full body clean + powdering when necessary (stickiness).
Monthly: Deep clean joints and crevices. Check for any signs of damage.
Internal Cleaning: Immediately after intimate use; deep clean removable inserts weekly if used frequently.
Regular Inspection: Check for rips, tears, punctures, or discoloration during cleaning.

Discoloration Warning: Avoid dark fabrics, direct sunlight, inks, newspapers, and prolonged pressure against hard objects.