For optimal safety and performance with inflatable sex dolls, adherence to foundational protocols is crucial.
Essential Preparation Protocol
Material Safety Verification: Confirm toy compatibility with body-safe Phthalate-Free TPE or medical-grade silicone. Perform manufacturer-recommended patch testing.
Sterilization Procedure: Wash thoroughly with warm water (38°C max) and non-abrasive soap pre/post-use. Allow complete air-drying before storage.
Lubricant Specifications: Exclusively use premium water-based lubricants. Avoid silicone-based/synthetic oils that degrade material integrity.
Operational Best Practices
Controlled Inflation System:
- Engage air valve lock mechanism before inflation
- Inflate incrementally to 80% capacity
- Finalize inflation post-positioning adjustment
Anatomical Alignment: Adjust skeletal structure via internal rods for ergonomic positioning. Maintain natural joint articulation limits.
Thermal Management: Maintain ambient temperature between 18-25°C. Prolonged UV exposure causes polymer degradation.
Maintenance & Storage Protocol
Decontamination Cycle:
- Post-use enzymatic cleanser application
- Rinse until surfactant-free (pH 5.5-7)
- Apply renewal powder after 72hr drying cycle
Airtight Preservation: Store in oxygen-barrier bags with moisture absorbers. Maintain storage humidity below 45% RH.
Structural Integrity Monitoring: Perform weekly inflation tests. Inspect for micro-tears using tensile strain detection methods.
Safety & Compliance Requirements
Biohazard Prevention: Utilize FDA-approved barrier protection with every orifice engagement. Destroy doll immediately upon barrier compromise.
Material Reactivity Testing: Conduct quarterly phthalate leachate testing. Replace if plasticizer levels exceed 0.1% w/w.
Pressure Calibration: Never exceed manufacturer’s maximum PSI rating. Use digital manometer for precision inflation control.
